#Canon pixam mp160 error 5 how to

You can use original or third-party cartridges but with third-party cartridges there is a higher chance to receive the error E05. If the Error E05 still shows after making the cartridge contacts and printer contacts dry, it’s time to consider replacing the print cartridges. Try to print and see if error E05 is gone, otherwise repeat the cleaning or do a cartridge cleaninc cycle from the printer troubleshooting menu if the printer allows it.

Need help or just some ideas if you have any. Place the clean dry cartridges back in the printer and lock the print cartridge lever – savety to keep them locked.Ĭlose the printer service door and plug in the power to the printer. Problem scanning with Canon Pixma MP160 getting error code:2,114,0. Repeating this until there is no more ink left on the paper towel should be ok to proceed to the next step. Use a DRY soft paper towel and touch the cartridge contacts inside the printer to absorb any printer ink that is in there.ĭo not move the paper tpowel left or right or up and down as that might bend the contact pins inside the printer.Īll you need to do is get the area dry and also to check the paper towel if any ink was on the contacts or behind the contacts. If there is liquid or ink on the cartridge pins contact area use a bit of Isopropyl alcohol 95-97% or even regular medicinal denaturated alcohol without aditives to gently wipe the contacts on the cartridge. No printer ink should be in the contacts area. The print cartridge contacts should be clean and dry. Inspect the contacts on the cartridge and inside the printer.

Inspect contacts on cartridges and printer Open the printer cartridge service door as shown in the video and pull the black and color cartridges out of the printer. What works 99% of the time is to do the steps bellow even a few times if it does not work at the first try.

#Canon pixam mp160 error 5 how to

Error E50 fixed video steps How to fix error E05