#RESET BOXEE BOX TO FACTORY SETTINGS HOW TO#
#RESET BOXEE BOX TO FACTORY SETTINGS 1080P#
#RESET BOXEE BOX TO FACTORY SETTINGS INSTALL#

Multiple XBMC Boxes and how to sync settings … Uninstalling is easy,… simply shutdown your Boxee Box and remove the USB stick with the XBMC files on it. However, with videos like that, using fast forward or skipping forward did cause the sound go out of sync.

#RESET BOXEE BOX TO FACTORY SETTINGS 1080P#

Performance was pretty good, even at 1080p with 5.1 Audio and subtitles. Note that this does not need to be the USB stick we just created for the BOXEE+HACK, you can create a clean USB stick if you’d like (again: 1 partition, MS-DOS FAT formatted).Īfter that, place the USB stick into your Boxee Box and boot it – you’ll see that it will boot straight into XBMC.

Next unzip the downloaded XBMC ZIP file and copy all the files in the folder named “ xbmc” to the USB stick (SD-Card will work as well, but is not recommended for speed and heat reasons). This is not a real installation – XBMC will run of your USB stick!īefore proceeding, shutdown your Boxee Box. The screensaver will show the same message. Note : A succesful “hack” can be identified during boot where you will see “BOXEE HACKS+” on your screen briefly (instead of just “BOXEE”). If not: check it an restart the Boxee Box. Step 8: After restart verify if “ Enable Windows File Sharing” is still checked in “ Settings” “ Network” “ Servers‘. Tip: You might need to use boxeebox BOXEE /install.sh instead under certain circumstances (user tip). Step 6: Add sh /media /BOXEE /install.sh to the “ Host Name“, so it looks something like this: boxeebox sh /media /BOXEE /install.sh Press the ” ” button on your remote, and select the ” ” option from the upcoming window. If you don’t know how to get to settings: Step 5: Once fully booted, go to “ Settings” “ Network” “ Servers” and check “ Enable Windows File Sharing“. Step 4: Plug the USB stick into your Boxee Box and start it (plugin powersupply, press power button). Step 3: From the downloaded hack file, copy the contents of the “ install” folder on the USB stick. Step 2: Partition a USB stick to one Partition, formatted MS-DOS FAT and name it “ BOXEE” (all capitals, no quotes!). Step 1: Shutdown your Boxee Box completely and remove the power supply cable! Installation, on a USB stick (SD-Card will work as well, however USB stick is recommended): The hack is needed to prevent Boxee (the software) from starting so we can “inject” XBMC instead. I strongly recommend downloading the most recent version from Boxeed, but as usual we offer a backup at Tweaking 4All as well (which might be outdated!). This plugin/hack offers a great deal of cool fixes and addons for your Boxee Box, so even if you’re not planning to run XBMC, this plugin is highly recommended!

#RESET BOXEE BOX TO FACTORY SETTINGS INSTALL#

– SD-Cards can be used but tend to become hot and perform rather poorly Needed Softwareīefore we can run XBMC on Boxee Box we will need to apply a little hack, called “ Boxee+Hacks” which can be downloaded from Boxeed – you will find instructions how to install it there as well, but we will describe it on this page as well. – External (USB 2.0) harddisks will work as well and in general will perform even better – Fast USB 2.0 Sticks improve XBMC performance The requirements of the stick are not mind blowing, I’ve done this successfully with an old (USB 2.0) 4Gb USB stick. Most recommend using a USB stick, so that’s what we’ll do here as well. This trick will also work with an SD-Card, but there have been plenty reports of the SD-Cards/Card-reader being slow, unreliable, turning flaming hot, etc. So what do we need? Pretty simple: some software, a USB stick and a Boxee Box.

Reset boxee box to factory settings